Lets Make Something banner



Youtube graphic
I have a youtube channel with over 800 Project Videos!

Hi, Thanks for visiting my website. My name is Will and if you have questions
or would like to
contribute projects or ideas you can contact me Will

Make Wolverine Claws That shoot out!


This is a fun and easy foamboard project and I give you the template which makes it very easy for you to make. You just need a few basic supplies like foamboard, hot glue and paint and you can have yourself a fun set of wolverine claws.

The template for this project is right here.

There is also a video tutorial on this project at the bottom of the page.

Will has a youtube channel with over 700 videos on projects you can make. Check it out right here



The wolverine claws



Materials Needed:

  • The Template
  • 1 empty cereal box for the claws
  • 1 sheet of foamboard
  • Hot glue gun
  • Glue stick
  • Some scrap vinyl, leather or cloth for the straps
  • A few pieces of velcro - optional for the straps
  • Brown, yellow and black paint


Note from Will: The Template and the tutorial are both absolutely free! But would you consider a donation of $1 to support my work? Paypal makes it very easy and safe. Click here to donate $1 - Every little bit helps Will to keep making great tutorials and templates. Thanks!


Earn a Certificate of Completion!


If you make this project email me a picture! I will email you a certificate of completion from stormthecastle.com You can print it up and hang it on the wall.


Glue down the claw sheet

Print up the template. First take the sheet that has all the claws on it. Use a glue stick and glue that whole page down to cereal box cardboard.


Tape down template sheets

There are two more template sheets. These are for the box that the claws slide in. Tape these down to foam board. Just a couple of pieces of tape on each is fine. We just need to hold them in place while we draw on them.


Now, with a pencil and ruler trace over all those pieces on the foam board sheet. These are all the box pieces. Not the claw pieces. We want to press firmly down in order to make an impression on the foam board.


Draw it out on the foam board

Now you can lift up those two sheets and see the impressions in the foamboard. Go over all of these impressions with a pencil. And use a ruler to keep the lines nice and straight.

What we have now done is transferred the patterns on paper to the foam board.

IMPORTANT NOTE: When you have drawn these look at how each piece is lettered on the template. And write that same letter on each of these foamboard pieces. This will make it easier to assemble later.


Now go ahead and cut those foamboard pieces out.


But.... note those two rectangles on part "A" don't cut those out. They denote where we will glue a couple of pieces.



And go ahead and cut those nine claws out.

Okay! All the preparatory work is done. Let's continue with the tutorial and put it all together!


Watch the Video Tutorial:



X MAN Wolverine Claws High Quality of Refinement Cosplay Props Video Display


Make a Daedric Bow and Arrow

a Daedric Bow and Arrow

Fun and easy project. You just need two sheets of foamboard to make this bow. I give you the template. If you are a skyrim or elder scrolls fan you are going to love this one! Make a Daedric Bow




Sign up for my newsletter!

Do you like making projects and exploring a variety of hobbies?

Sign up for my free newsletter. I give you regular updates on hobbies and projects you can make. it is totally free and I don't share your email with anybody.