swords banner

Home
Home

Youtube graphic
I have a youtube channel with over 700 Videos!



Will
Hi, Thanks for visiting my website. My name is Will and if you have questions
or would like to
contribute projects or ideas you can contact me Will

Battle Ready Swords

Battle ready means just that. It is ready for battle. One thing that it means is that the sword is sharpened. Some other things to look for in a battle ready sword are a full tang. That is very important. Do not buy a battle ready sword if it isn't full tang. And the steel is important. There are a a lot of variables when it comes to steel but some good rules of thumb are to look for high carbon steel or a steel that is denoted as either 1060, 1065, or 1095. Those are good steels for a sword.

I have an explanation of full tang right here if you need to learn about it.

 

Sword

The Crecy Medieval War Full Tang Tempered Battle Ready Handmade Sharp Edge Sword

  • FULL TANG TEMPERED BATTLE READY SWORD / Razor Sharp Edge Blade by Warrior Replicas
  • Overall Size: 45-1/2" , Blade Size: 35-1/2", Blade width: 1-13/16" , Blade Thickness: 3/16" ,
  • Blade material: 1065/1095 High Carbon Steel , Blade: Full Tang, Razor Sharp Edge
  • BONUS: Sword Frog / Scabbard : Leather
  • Weight W/O Scabbard: 3 lbs 0 oz , Weight W/Scabbard: 3 lbs 10 oz

The Crecy was one of the most decisive battles of the 100 Years War. After the battle of Sluys, Edward III landed in Normandy in July 1346 with about 10,000 men. The French pursued. Edward III decided to halt near Crecy in Normandy and to prepare for battle the next day. However, the French vanguard made contact and started to attack without the benefit of a plan. The French made as many as 15 attacks and the English checked each one in turn, primarily thanks to the English long bowmen. In the end, the French were decimated and the English had a decisive victory. The Crecy is one type of sword that would have seen service on both sides during the 100 Years War. Oakeshott describes the Type XVIa as having a long, tapering blade, broad at the hilt, with a sharp, often reinforced, point. The Crecy is a fine example of a later period epee de guerre, or war sword, a refinement of the earlier XIIa in response to changes in the armor of the period.

 

Sword

15th Century Hand-And-A-Half Full Tang Tempered Battle Ready Hand Forged Sharp Sword

  • 15th Century Hand-And-A-Half Full Tang Tempered Battle Ready Hand Forged Sharp Sword by Warrior Replicas
  • Overall Size: 43-1/2" / Blade Size: 35-3/4" / Blade width: 2" / Blade Thickness: 3/16"
  • Blade material: 1065/1095 High Carbon Steel / Blade: Full Tang, Razor Sharp Edge
  • BONUS: Sword Frog / Scabbard : Leather (Hand Forged in India)
  • Weight W/O Scabbard: 2 lbs 8 oz / Weight W/Scabbard: 3 lbs 9 oz

While glancing through the book, The Medieval Soldier, we ran across a hand-and-a-half sword that really caught our eye. The hand-and-a-half was quite popular during the Middle Ages. It was light enough to be used with one hand, with maybe a small buckler in the other, or you could grip it with both hands, thereby delivering a much stronger cut or thrust. Although the fullered blade was sharply pointed to penetrate joints in armour or to split mail links, it was also wide enough to deliver a cut. The high carbon steel blade has steel guard and pommel, with a wood grip covered in leather. Scabbard has steel mounts and is made from high grade leather.

 

Sword

German Bastard Full Tang Tempered Battle Ready Hand Forged Sword *SHARP EDGE BLADE*

  • German Bastard Full Tang Tempered Battle Ready Hand Forged Sword *SHARP EDGE BLADE* by Warrior Replicas
  • Overall Size: 38-3/4" / Blade Size: 29-3/4" / Blade width: 2" / Blade Thickness: 3/16"
  • Blade material: 1065/1095 High Carbon Steel / Blade: Full Tang, Razor Sharp Edge
  • BONUS: Sword Frog / Scabbard : Leather (Hand Forged in India)
  • Weight W/O Scabbard: 3 lbs 10 oz / Weight W/Scabbard: 4 lbs 10 oz

This sword is a perfect replica of these swords lasted from roughly 1350 to 1550, declined in the late 16th century, and they were obsolete by the early 17th century. In modern use, the term "bastard-sword" refers to a specific sort of longsword, most commonly a compromise between the smaller one-handed arming sword and larger two-handed sword that was primarily used in "cut and thrust" type of sword play. Typically, the bastard sword was heavy enough for battlefield use, while still being light enough for the quick moves found commonly in cut-and-thrust fighting and/or dueling. This compromise is accomplished by a distal taper of the blade, and a carefully balanced pommel and grip. Like many German swords it is primarily a cutting sword, with a wide blade that has a flattened oval cross section that gives very little resistance in a cutting blow. It is also a perfect example of a true hand-and-half or bastard sword. The proportions of the sword are that of a one handed sword, but with a slightly longer grip and a pommel shape that will allow two hands to be used by gripping both. The grip is wood covered in cord and leather. The long quillion has a decorative finial on the end and the side rings provide good hand protection. Antiqued steel parts to match the original.

 

Sword

Medieval Warrior Late Middle Ages Full Tang Tempered Battle Ready Hand Forged Sword

  • Overall Length: 46 Inches Blade Length: 34.5 Inches Blade Width: 1.75 Inches, Blade Thickness: 4.4mm Handle Length: 11.5 Inches Includes: Genuine Leather Sheath, Belt, 3 fullers.
This fully functional historical reproduction is crafted after a sword design which was prominent in medieval Europe in the 16th Century and is representative of an Oakeshott Type XXa with its narrow blade and multiple fullers. Two of the fullers run parallel to each other near the hilt while a third sits alone in the middle third of the blade. With an overall length of 42 inches, the sword is long but nevertheless light enough to permit quick, shearing strikes with the finely tempered steel 33.5 inch blade. The handle features a lightweight steel guard and pommel along with a leather wrapped hilt that offers a comfortable grip, the sword feels great in the hand. A great sword to add to any collection, it includes a FREE leather sheath with its own leather belt measuring approximately 50 inches around. Tempered Steel Overall Length: 46 Inches Blade Length: 34.5 Inches Blade Width: 1.75 Inches, Blade Thickness: 4.4mm Handle Length: 11.5 Inches Includes: Genuine Leather Sheath, Belt, 3 fullers.

 

Sword

8th Century Viking Sword Full Tang Tempered Battle Ready Handmade Sword SHARP

  • Blade Length: 31 Inches Overall Length: 38.75 Inches Weight: 3 lbs. 7 oz. Balance Point: 3.75 Inches Below Hilt

8th Century Viking Sword Full Tang Tempered Battle Ready Handmade Sword SHARP!!!!!!!! This Viking Sword is fashioned after an Eighth Century Design. This beautiful sword has a high carbon tempered steel 31 inch blade with hardwood handle covered with black leather and with polished solid steel pommel and cross guard. The Viking sword has a full tang that is peened over top of the pommel. A wood scabbard wrapped in leather with steel accents is included. Key Features Includes Wooden Scabbard Wrapped In Leather Functional Sword Made Of High Carbon Steel Solid Steel Cross Guard And Pommel Measurements Blade Length: 31 Inches Overall Length: 38.75 Inches Weight: 3 lbs. 7 oz. Balance Point: 3.75 Inches Below Hilt


Sign up for my newsletter!

Do you like making projects and exploring a variety of hobbies?

Sign up for my free newsletter. I give you regular updates on hobbies and projects you can make. it is totally free and I don't share your email with anybody.