In this part of the tutorial we paint the karambit and finish it.

Part 1 of this tutorial is here

Earn a Certificate of Completion!

If you make this project email me a picture! I will email you a certificate of completion from stormthecastle.com You can print it up and hang it on the wall.

Sand the edges of the "wood" handles. This will make them look more like wood. Just round those edges out a bit.

If you have mod podge go ahead and coat the whole knife. This will give it richness and lustre.

Let's paint all the steel parts black. This will add depth and strength to it.

And paint the other steel parts too. They are the finger ring and along the center line of the knife.

Now let's paint the handle. And you can paint it any way you like, But if you want it to look like mine this is how you do it. Paint all the wooden handle an ochre color. You can do this by mixing yellow with a little bit of brown.

Now loosely mix some black and some brown and dab it onto the handle.

Then dab and smudge it with a moistened paper towel.

Now paint all the steel parts silver. This includes the blade, the finger ring and the center spine in the middle of the handle. If you don't have silver you can use a light gray.

Now use paint or a paint pen to put on the pins.

If you have some kind of sealant go ahead and seal it! This will finish it off and give it a nice look!

That's It! Your Karambit is done!

Mod Podge Waterbase Sealer, Glue and Finish (16-Ounce), CS11302 Matte Finish

Mod Podge dries clear in approximately 15-20 minutes and can be sanded to a smooth finish. Apply with brush or sponge applicator. Close container after each use. Clean up with water while wet. Once dry, Mod Podge cannot be removed. Use as a puzzle saver, a sealer glue, a quick finish, a textured finish,or a build-up finish." Non-toxic.

Forge a Rebar Knife

Rebar is a cheap and readily available material. It is easy to forge and in this tutorial I show you how to make a knife with it. I also show you some new techniques like how to bend the steel into curves. Make a Rebar Knife

Make the Iron Sword from Skyrim

Fun project that looks reallly good. I also show you a great technique for getting that Iron look. Make the Iron sword from skyrim.

Do you like making projects and exploring a variety of hobbies?

Sign up for my free newsletter. I give you regular updates on hobbies and projects you can make. it is totally free and I don't share your email with anybody.