Home

I have a youtube channel with over 1000 Project Videos!

Hi, Thanks for visiting my website. My name is Will and if you have questions
or would like to
contribute projects or ideas you can contact me

Make the Alita Battle Angel Sword

Tools and Materials Needed:

• 1 sheet of foamboard Elmer's Acid-Free Foam Boards,
• Some type of white glue or a hot glue gun Surebonder PRO2-100 100-Watt High Temperature Industrial Glue Gun, Black (Wills Favorite Hot Glue gun)
• The Template (Right Here)
• Gold Marker (optional) I use the cricut here
• Mod Podge Spray on Super Gloss (optional)
• Paints: Silver and black (Grey is ok if you don't have silver)
• Xacto knife for cutting the foam board. X-acto designer series knife #1 blade

Earn a Certificate of Contribution!

If you make this project email me a picture! I will email you a certificate of completion from stormthecastle.com You can print it up and hang it on the wall.

My email:

Will's Tip on Cutting Foam board: Don't try to cut all the way through it in one swipe. Use a really sharp blade and make three passes. the first pass just cuts the top layer of paper. Second pass cuts the foam and the third pass cuts through the bottom layer of foam.

Let's Get started and Make the Sword

Print up the template and cut out the parts. There are six parts.

Tape together the three parts 1, 2, and 3 to make up the body of the sword.

Lay the cut out template pieces on your sheet of foam board and trace them. With most of the pieces you trace two of them. But with the saddle piece you only need to trace one. Don't forget to add the pair of dashed lines on the saddle piece.

Let's continue with the tutorial

The Video Tutorial is here: