The infinity blade is a fun and easy diy project. It comes out great and you need very few supplies including three sheets of foamboard, some paint and some glue. That's about it.

I don't show you how to make it glow. But if you want to do that you should check out my tutorial on how to make the Glowing rune sword from the Witcher.

The TEMPLATE for this project is here.

Will has a youtube channel with over 700 videos on projects you can make. Check it out right here

Earn a Certificate of Contribution!

If you make this project email me a picture! I will email you a certificate of contribution from stormthecastle.com You can print it up and hang it on the wall.

Materials and tools used for this project:

• 3 sheets of foam board (Elmer's 900802 Foam Board, White Surface with White Core, 20 x30 (Pack of 10) )
• Some kind of glue or a hot glue gun
• Paints: Gold, Silver Brown
• Sharpie or a marker
• Tool to cut foam board with. I use an x-acto knife X-ACTO Z Series #1 Knife with Cap (XZ3601)

Print up the template and cut out the parts. There are eight parts.

Tape together the pieces of the template like this. You end up with two sword profiles. One is made up of A,B,C and D. And the other is made up of 1,2,3 and 4.

Cut out the holes in each template too. Each one has five holes.

Take the template labeled 1,2,3,4 and lay it diagonally on a sheet of foam board. The template is just the right size to fit.

Trace around the template onto the foamboard. And trace the five holes too.

And cut that shape out, also cut out the holes.

Repeat this same process with the A,B,C,D template. Except with this one do it twice so you end up with two of them.

So now you have three pieces. One of the 1,2,3,4 and two of the A,B,C,C.

Glue those three pieces together, one right on top of the other with the 1,2,3,4 right in the middle.

Clean everything up with a knife and some sandpaper.

Okay, the building is done. Let's Paint it!

You can also watch the video here: